Planned work

Controller and phone acceptance

• [ ] Test WFB and wheel-e discovery and telemetry against the intended controller firmware; compare speed, voltage and angle with the phone app.
• [ ] Confirm the inferred WFB telemetry tail and live command encodings, including LOCK (12), against hardware. Check lock/unlock acknowledgement and persistence across power cycles.
• [ ] Exercise encrypted VESC Express pairing, failed PINs, retry and re-pairing after an upstream PIN change.
• [ ] Check phone proxy interoperability, MTU differences, sustained traffic, lease release and upstream loss over BLE, CAN and UART.
• [ ] Confirm proxy bond revocation after bike PIN changes/removal, PIN persistence, boot unlock and locked-screen timeout/wake behavior.
• [ ] Commission CAN/UART wiring with the required transceiver, controller discovery and multiple-controller routing.

Device and release acceptance

• [ ] Soak touch, scrolling and both orientations with concurrent radio traffic; investigate intermittent idle touch I2C NACKs.
• [ ] Measure sustained display responsiveness, internal heap minima and task-stack headroom under realistic load.
• [ ] Exercise USB and battery cold boots, reconnect/stale-data behavior and preference persistence.
• [ ] Test Wi-Fi/OTA success, interruption, cancellation, rollback and first-boot acceptance on the device.
• [ ] Confirm the GitHub Pages deployment and generated screenshots on the default branch.

Protocol coverage

• [ ] Resolve signature, argument order and scaling uncertainties in the supplied protocol notes before enabling persisted tuning or additional feature/horn commands.